itsscb/embassy
1
0
Fork 0
mirror of https://github.com/embassy-rs/embassy.git synced 2025-09-27 04:10:25 +00:00
Code Issues Packages Projects Releases Wiki Activity

rp235x overclocking

Browse Source
This commit is contained in:
1-rafael-1 2025-05-11 17:26:36 +02:00
parent 4621c8aa7a
commit 4567beda7b
5 changed files with 405 additions and 65 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

329
embassy-rp/src/clocks.rs
View File

@ -38,7 +38,7 @@
//!
//! ## Examples
//!
//! ### Standard 125MHz configuration
//! ### Standard 125MHz (rp2040) or 150Mhz (rp235x) configuration
//! ```rust,ignore
//! let config = ClockConfig::crystal(12_000_000);
//! ```
@ -136,43 +136,152 @@ pub enum PeriClkSrc {
// Gpin1 = ClkPeriCtrlAuxsrc::CLKSRC_GPIN1 as _ ,
}
/// Core voltage regulator settings for RP2040.
/// Core voltage regulator settings.
///
/// The RP2040 voltage regulator can be configured for different output voltages.
/// The voltage regulator can be configured for different output voltages.
/// Higher voltages allow for higher clock frequencies but increase power consumption and heat.
#[cfg(feature = "rp2040")]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum CoreVoltage {
/// 0.80V - Suitable for lower frequencies
// RP2040 voltage levels
#[cfg(feature = "rp2040")]
/// RP2040: 0.80V
V0_80 = 0b0000,
/// 0.85V
#[cfg(feature = "rp2040")]
/// RP2040: 0.85V
V0_85 = 0b0110,
/// 0.90V
#[cfg(feature = "rp2040")]
/// RP2040: 0.90V
V0_90 = 0b0111,
/// 0.95V
#[cfg(feature = "rp2040")]
/// RP2040: 0.95V
V0_95 = 0b1000,
/// 1.00V
#[cfg(feature = "rp2040")]
/// RP2040: 1.00V
V1_00 = 0b1001,
/// 1.05V
#[cfg(feature = "rp2040")]
/// RP2040: 1.05V
V1_05 = 0b1010,
/// 1.10V - Default voltage level
#[cfg(feature = "rp2040")]
/// RP2040: 1.10V - Default voltage level
V1_10 = 0b1011,
/// 1.15V - Required for overclocking to 133-200MHz
#[cfg(feature = "rp2040")]
/// RP2040: 1.15V - Required for overclocking to 133-200MHz
V1_15 = 0b1100,
/// 1.20V
#[cfg(feature = "rp2040")]
/// RP2040: 1.20V
V1_20 = 0b1101,
/// 1.25V
#[cfg(feature = "rp2040")]
/// RP2040: 1.25V
V1_25 = 0b1110,
/// 1.30V
#[cfg(feature = "rp2040")]
/// RP2040: 1.30V
V1_30 = 0b1111,
// RP235x voltage levels
#[cfg(feature = "_rp235x")]
/// RP235x: 0.55V
V0_55 = 0b00000,
#[cfg(feature = "_rp235x")]
/// RP235x: 0.60V
V0_60 = 0b00001,
#[cfg(feature = "_rp235x")]
/// RP235x: 0.65V
V0_65 = 0b00010,
#[cfg(feature = "_rp235x")]
/// RP235x: 0.70V
V0_70 = 0b00011,
#[cfg(feature = "_rp235x")]
/// RP235x: 0.75V
V0_75 = 0b00100,
#[cfg(feature = "_rp235x")]
/// RP235x: 0.80V
V0_80 = 0b00101,
#[cfg(feature = "_rp235x")]
/// RP235x: 0.85V
V0_85 = 0b00110,
#[cfg(feature = "_rp235x")]
/// RP235x: 0.90V
V0_90 = 0b00111,
#[cfg(feature = "_rp235x")]
/// RP235x: 0.95V
V0_95 = 0b01000,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.00V
V1_00 = 0b01001,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.05V
V1_05 = 0b01010,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.10V - Default voltage level
V1_10 = 0b01011,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.15V
V1_15 = 0b01100,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.20V
V1_20 = 0b01101,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.25V
V1_25 = 0b01110,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.30V
V1_30 = 0b01111,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.35V
V1_35 = 0b10000,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.40V
V1_40 = 0b10001,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.50V
V1_50 = 0b10010,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.60V
V1_60 = 0b10011,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.65V
V1_65 = 0b10100,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.70V
V1_70 = 0b10101,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.80V
V1_80 = 0b10110,
#[cfg(feature = "_rp235x")]
/// RP235x: 1.90V
V1_90 = 0b10111,
#[cfg(feature = "_rp235x")]
/// RP235x: 2.00V
V2_00 = 0b11000,
#[cfg(feature = "_rp235x")]
/// RP235x: 2.35V
V2_35 = 0b11001,
#[cfg(feature = "_rp235x")]
/// RP235x: 2.50V
V2_50 = 0b11010,
#[cfg(feature = "_rp235x")]
/// RP235x: 2.65V
V2_65 = 0b11011,
#[cfg(feature = "_rp235x")]
/// RP235x: 2.80V
V2_80 = 0b11100,
#[cfg(feature = "_rp235x")]
/// RP235x: 3.00V
V3_00 = 0b11101,
#[cfg(feature = "_rp235x")]
/// RP235x: 3.15V
V3_15 = 0b11110,
#[cfg(feature = "_rp235x")]
/// RP235x: 3.30V
V3_30 = 0b11111,
}
#[cfg(feature = "rp2040")]
impl CoreVoltage {
/// Get the recommended Brown-Out Detection (BOD) setting for this voltage.
/// Sets the BOD threshold to approximately 80% of the core voltage.
fn recommended_bod(self) -> u8 {
#[cfg(feature = "rp2040")]
match self {
CoreVoltage::V0_80 => 0b0100, // 0.645V (~81% of 0.80V)
CoreVoltage::V0_85 => 0b0101, // 0.688V (~81% of 0.85V)
@ -180,12 +289,38 @@ impl CoreVoltage {
CoreVoltage::V0_95 => 0b0111, // 0.774V (~81% of 0.95V)
CoreVoltage::V1_00 => 0b1000, // 0.817V (~82% of 1.00V)
CoreVoltage::V1_05 => 0b1000, // 0.817V (~78% of 1.05V)
CoreVoltage::V1_10 => 0b1001, // 0.860V (~78% of 1.10V)
CoreVoltage::V1_10 => 0b1001, // 0.860V (~78% of 1.10V), the default
CoreVoltage::V1_15 => 0b1010, // 0.903V (~79% of 1.15V)
CoreVoltage::V1_20 => 0b1011, // 0.946V (~79% of 1.20V)
CoreVoltage::V1_25 => 0b1100, // 0.989V (~79% of 1.25V)
CoreVoltage::V1_30 => 0b1101, // 1.032V (~79% of 1.30V)
}
#[cfg(feature = "_rp235x")]
match self {
CoreVoltage::V0_55 => 0b00001, // 0.516V (~94% of 0.55V)
CoreVoltage::V0_60 => 0b00010, // 0.559V (~93% of 0.60V)
CoreVoltage::V0_65 => 0b00011, // 0.602V (~93% of 0.65V)
CoreVoltage::V0_70 => 0b00011, // 0.602V (~86% of 0.70V)
CoreVoltage::V0_75 => 0b00100, // 0.645V (~86% of 0.75V)
CoreVoltage::V0_80 => 0b00101, // 0.688V (~86% of 0.80V)
CoreVoltage::V0_85 => 0b00110, // 0.731V (~86% of 0.85V)
CoreVoltage::V0_90 => 0b00110, // 0.731V (~81% of 0.90V)
CoreVoltage::V0_95 => 0b00111, // 0.774V (~81% of 0.95V)
CoreVoltage::V1_00 => 0b01000, // 0.817V (~82% of 1.00V)
CoreVoltage::V1_05 => 0b01000, // 0.817V (~78% of 1.05V)
CoreVoltage::V1_10 => 0b01001, // 0.860V (~78% of 1.10V), the default
CoreVoltage::V1_15 => 0b01001, // 0.860V (~75% of 1.15V)
CoreVoltage::V1_20 => 0b01010, // 0.903V (~75% of 1.20V)
CoreVoltage::V1_25 => 0b01010, // 0.903V (~72% of 1.25V)
CoreVoltage::V1_30 => 0b01011, // 0.946V (~73% of 1.30V)
CoreVoltage::V1_35 => 0b01011, // 0.946V (~70% of 1.35V)
CoreVoltage::V1_40 => 0b01100, // 0.989V (~71% of 1.40V)
CoreVoltage::V1_50 => 0b01101, // 1.032V (~69% of 1.50V)
CoreVoltage::V1_60 => 0b01110, // 1.075V (~67% of 1.60V)
CoreVoltage::V1_65 => 0b01110, // 1.075V (~65% of 1.65V)
CoreVoltage::V1_70 => 0b01111, // 1.118V (~66% of 1.70V)
_ => 0b10000, // the rp2350 datasheet repeats this value for all other core voltages
}
}
}
@ -209,12 +344,10 @@ pub struct ClockConfig {
/// RTC clock configuration.
#[cfg(feature = "rp2040")]
pub rtc_clk: Option<RtcClkConfig>,
/// Core voltage scaling (RP2040 only). Defaults to 1.10V.
#[cfg(feature = "rp2040")]
/// Core voltage scaling. Defaults to 1.10V.
pub core_voltage: CoreVoltage,
/// Voltage stabilization delay in microseconds.
/// If not set, defaults will be used based on voltage level.
#[cfg(feature = "rp2040")]
pub voltage_stabilization_delay_us: Option<u32>,
// See above re gpin handling being commented out
// gpin0: Option<(u32, Gpin<'static, AnyPin>)>,
@ -250,9 +383,7 @@ impl Default for ClockConfig {
adc_clk: None,
#[cfg(feature = "rp2040")]
rtc_clk: None,
#[cfg(feature = "rp2040")]
core_voltage: CoreVoltage::V1_10,
#[cfg(feature = "rp2040")]
voltage_stabilization_delay_us: None,
// See above re gpin handling being commented out
// gpin0: None,
@ -323,9 +454,7 @@ impl ClockConfig {
div_frac: 0,
phase: 0,
}),
#[cfg(feature = "rp2040")]
core_voltage: CoreVoltage::V1_10, // Use hardware default (1.10V)
#[cfg(feature = "rp2040")]
voltage_stabilization_delay_us: None,
// See above re gpin handling being commented out
// gpin0: None,
@ -368,9 +497,7 @@ impl ClockConfig {
div_frac: 171,
phase: 0,
}),
#[cfg(feature = "rp2040")]
core_voltage: CoreVoltage::V1_10, // Use hardware default (1.10V)
#[cfg(feature = "rp2040")]
voltage_stabilization_delay_us: None,
// See above re gpin handling being commented out
// gpin0: None,
@ -394,12 +521,17 @@ impl ClockConfig {
/// the usual 12Mhz crystal, or panic if no valid parameters can be found.
///
/// # Note on core voltage:
///
/// **For RP2040**:
/// To date the only officially documented core voltages (see Datasheet section 2.15.3.1. Instances) are:
/// - Up to 133MHz: V1_10 (default)
/// - Above 133MHz: V1_15, but in the context of the datasheet covering reaching up to 200Mhz
/// That way all other frequencies below 133MHz or above 200MHz are not explicitly documented and not covered here.
/// In case You want to go below 133MHz or above 200MHz and want a different voltage, You will have to set that manually and with caution.
#[cfg(feature = "rp2040")]
///
/// **For RP235x**:
/// At this point in time there is no official manufacturer endorsement for running the chip on other core voltages and/or other clock speeds than the defaults.
/// Using this function is experimental and may not work as expected or even damage the chip.
pub fn system_freq(hz: u32) -> Self {
// Start with the standard configuration from crystal()
const DEFAULT_CRYSTAL_HZ: u32 = 12_000_000;
@ -407,9 +539,14 @@ impl ClockConfig {
// No need to modify anything if target frequency is already 125MHz
// (which is what crystal() configures by default)
#[cfg(feature = "rp2040")]
if hz == 125_000_000 {
return config;
}
#[cfg(feature = "_rp235x")]
if hz == 150_000_000 {
return config;
}
// Find optimal PLL parameters for the requested frequency
let sys_pll_params = find_pll_params(DEFAULT_CRYSTAL_HZ, hz)
@ -429,6 +566,14 @@ impl ClockConfig {
_ => CoreVoltage::V1_10, // Use default voltage (V1_10)
};
}
#[cfg(feature = "_rp235x")]
{
config.core_voltage = match hz {
// There is no official support for running the chip on other core voltages and/or other clock speeds than the defaults.
// So for now we have not way of knowing what the voltage should be. Change this if the manufacturer provides more information.
_ => CoreVoltage::V1_10, // Use default voltage (V1_10)
};
}
config
}
@ -791,7 +936,6 @@ pub struct RtcClkConfig {
/// // Find parameters for 133MHz system clock from 12MHz crystal
/// let pll_params = find_pll_params(12_000_000, 133_000_000).unwrap();
/// ```
#[cfg(feature = "rp2040")]
fn find_pll_params(input_hz: u32, target_hz: u32) -> Option<PllConfig> {
// Fixed reference divider for system PLL
const PLL_SYS_REFDIV: u8 = 1;
@ -925,18 +1069,59 @@ pub(crate) unsafe fn init(config: ClockConfig) {
};
CLOCKS.rosc.store(rosc_freq, Ordering::Relaxed);
// Set Core Voltage (RP2040 only), if we have config for it and we're not using the default
#[cfg(feature = "rp2040")]
// Set Core Voltage, if we have config for it and we're not using the default
{
let voltage = config.core_voltage;
#[cfg(feature = "rp2040")]
let vreg = pac::VREG_AND_CHIP_RESET;
#[cfg(feature = "_rp235x")]
let vreg = pac::POWMAN;
let current_vsel = vreg.vreg().read().vsel();
let target_vsel = voltage as u8;
// If the target voltage is different from the current one, we need to change it
if target_vsel != current_vsel {
// Use modify() to preserve the HIZ and EN bits - otherwise we will disable the regulator when changing voltage
vreg.vreg().modify(|w| w.set_vsel(target_vsel));
#[cfg(feature = "rp2040")]
{
// Use modify() to preserve the HIZ and EN bits - otherwise we will disable the regulator when changing voltage
vreg.vreg().modify(|w| w.set_vsel(target_vsel));
}
#[cfg(feature = "_rp235x")]
{
// The rp235x has a different way of controlling the voltage regulator
// Changes to the voltage regulator are protected by a password, see datasheet section 6.4
// The password is "5AFE" (0x5AFE), it must be set in the top 16 bits of the register
// The rp235x by default locks the voltage regulator control, so we need to unlock it first
// See datasheet section 6.3.2. Software Control
vreg.vreg_ctrl().modify(|w| {
// Add password to top 16 bits, preserving the rest, repeat below for other registers
w.0 = (w.0 & 0x0000FFFF) | (0x5AFE << 16);
w.set_unlock(true);
*w
});
// Set the voltage
vreg.vreg().modify(|w| {
w.0 = (w.0 & 0x0000FFFF) | (0x5AFE << 16);
w.set_vsel(target_vsel);
*w
});
// The rp235x has two more registers to set the voltage for low power mode
vreg.vreg_lp_entry().modify(|w| {
w.0 = (w.0 & 0x0000FFFF) | (0x5AFE << 16);
w.set_vsel(target_vsel);
*w
});
vreg.vreg_lp_exit().modify(|w| {
w.0 = (w.0 & 0x0000FFFF) | (0x5AFE << 16);
w.set_vsel(target_vsel);
*w
});
}
// Wait for the voltage to stabilize. Use the provided delay or default based on voltage
let settling_time_us = config.voltage_stabilization_delay_us.unwrap_or_else(|| {
@ -959,6 +1144,19 @@ pub(crate) unsafe fn init(config: ClockConfig) {
w.set_vsel(voltage.recommended_bod());
w.set_en(true); // Enable brownout detection
});
#[cfg(feature = "_rp235x")]
{
// The rp235x has a separate register for the BOD level in low power mode
vreg.bod_lp_entry().write(|w| {
w.set_vsel(voltage.recommended_bod());
w.set_en(true); // Enable brownout detection
});
vreg.bod_lp_exit().write(|w| {
w.set_vsel(voltage.recommended_bod());
w.set_en(true); // Enable brownout detection
});
}
}
}
@ -1283,6 +1481,73 @@ pub fn clk_rtc_freq() -> u16 {
CLOCKS.rtc.load(Ordering::Relaxed)
}
/// The core voltage of the chip.
///
/// Returns the current core voltage or an error if the voltage register
/// contains an unknown value.
pub fn core_voltage() -> Result<CoreVoltage, &'static str> {
#[cfg(feature = "rp2040")]
{
let vreg = pac::VREG_AND_CHIP_RESET;
let vsel = vreg.vreg().read().vsel();
match vsel {
0b0000 => Ok(CoreVoltage::V0_80),
0b0110 => Ok(CoreVoltage::V0_85),
0b0111 => Ok(CoreVoltage::V0_90),
0b1000 => Ok(CoreVoltage::V0_95),
0b1001 => Ok(CoreVoltage::V1_00),
0b1010 => Ok(CoreVoltage::V1_05),
0b1011 => Ok(CoreVoltage::V1_10),
0b1100 => Ok(CoreVoltage::V1_15),
0b1101 => Ok(CoreVoltage::V1_20),
0b1110 => Ok(CoreVoltage::V1_25),
0b1111 => Ok(CoreVoltage::V1_30),
_ => Err("Unexpected value in register"),
}
}
#[cfg(feature = "_rp235x")]
{
let vreg = pac::POWMAN;
let vsel = vreg.vreg().read().vsel();
match vsel {
0b00000 => Ok(CoreVoltage::V0_55),
0b00001 => Ok(CoreVoltage::V0_60),
0b00010 => Ok(CoreVoltage::V0_65),
0b00011 => Ok(CoreVoltage::V0_70),
0b00100 => Ok(CoreVoltage::V0_75),
0b00101 => Ok(CoreVoltage::V0_80),
0b00110 => Ok(CoreVoltage::V0_85),
0b00111 => Ok(CoreVoltage::V0_90),
0b01000 => Ok(CoreVoltage::V0_95),
0b01001 => Ok(CoreVoltage::V1_00),
0b01010 => Ok(CoreVoltage::V1_05),
0b01011 => Ok(CoreVoltage::V1_10),
0b01100 => Ok(CoreVoltage::V1_15),
0b01101 => Ok(CoreVoltage::V1_20),
0b01110 => Ok(CoreVoltage::V1_25),
0b01111 => Ok(CoreVoltage::V1_30),
0b10000 => Ok(CoreVoltage::V1_35),
0b10001 => Ok(CoreVoltage::V1_40),
0b10010 => Ok(CoreVoltage::V1_50),
0b10011 => Ok(CoreVoltage::V1_60),
0b10100 => Ok(CoreVoltage::V1_65),
0b10101 => Ok(CoreVoltage::V1_70),
0b10110 => Ok(CoreVoltage::V1_80),
0b10111 => Ok(CoreVoltage::V1_90),
0b11000 => Ok(CoreVoltage::V2_00),
0b11001 => Ok(CoreVoltage::V2_35),
0b11010 => Ok(CoreVoltage::V2_50),
0b11011 => Ok(CoreVoltage::V2_65),
0b11100 => Ok(CoreVoltage::V2_80),
0b11101 => Ok(CoreVoltage::V3_00),
0b11110 => Ok(CoreVoltage::V3_15),
0b11111 => Ok(CoreVoltage::V3_30),
_ => Err("Unexpected value in register"),
}
}
}
fn start_xosc(crystal_hz: u32, delay_multiplier: u32) {
let startup_delay = (((crystal_hz / 1000) * delay_multiplier) + 128) / 256;
pac::XOSC.startup().write(|w| w.set_delay(startup_delay as u16));

8
examples/rp/src/bin/overclock.rs
View File

@ -7,7 +7,7 @@
use defmt::*;
use embassy_executor::Spawner;
use embassy_rp::clocks::{clk_sys_freq, ClockConfig};
use embassy_rp::clocks::{clk_sys_freq, core_voltage, ClockConfig};
use embassy_rp::config::Config;
use embassy_rp::gpio::{Level, Output};
use embassy_time::{Duration, Instant, Timer};
@ -20,15 +20,15 @@ async fn main(_spawner: Spawner) -> ! {
// Set up for clock frequency of 200 MHz, setting all necessary defaults.
let config = Config::new(ClockConfig::system_freq(200_000_000));
// Show the voltage scale for verification
info!("System core voltage: {}", Debug2Format(&config.clocks.core_voltage));
// Initialize the peripherals
let p = embassy_rp::init(config);
// Show CPU frequency for verification
let sys_freq = clk_sys_freq();
info!("System clock frequency: {} MHz", sys_freq / 1_000_000);
// Show core voltage for verification
let core_voltage = core_voltage().unwrap();
info!("Core voltage: {}", Debug2Format(&core_voltage));
// LED to indicate the system is running
let mut led = Output::new(p.PIN_25, Level::Low);

10
examples/rp/src/bin/overclock_manual.rs
View File

@ -7,8 +7,7 @@
use defmt::*;
use embassy_executor::Spawner;
use embassy_rp::clocks;
use embassy_rp::clocks::{ClockConfig, CoreVoltage, PllConfig};
use embassy_rp::clocks::{clk_sys_freq, core_voltage, ClockConfig, CoreVoltage, PllConfig};
use embassy_rp::config::Config;
use embassy_rp::gpio::{Level, Output};
use embassy_time::{Duration, Instant, Timer};
@ -41,9 +40,12 @@ async fn main(_spawner: Spawner) -> ! {
// Initialize with our manual overclock configuration
let p = embassy_rp::init(configure_manual_overclock());
// Verify the actual system clock frequency
let sys_freq = clocks::clk_sys_freq();
// Show CPU frequency for verification
let sys_freq = clk_sys_freq();
info!("System clock frequency: {} MHz", sys_freq / 1_000_000);
// Show core voltage for verification
let core_voltage = core_voltage().unwrap();
info!("Core voltage: {}", Debug2Format(&core_voltage));
// LED to indicate the system is running
let mut led = Output::new(p.PIN_25, Level::Low);

74
examples/rp235x/src/bin/overclock.rs Normal file
View File

@ -0,0 +1,74 @@
//! # Overclocking the RP2350 to 200 MHz
//!
//! This example demonstrates how to configure the RP2350 to run at 200 MHz instead of the default 150 MHz.
//!
//! ## Note
//!
//! As of yet there is no official support for running the RP235x at higher clock frequencies and/or other core voltages than the default.
//! Doing so may cause unexpected behavior and/or damage the chip.
#![no_std]
#![no_main]
use defmt::*;
use embassy_executor::Spawner;
use embassy_rp::clocks::{clk_sys_freq, core_voltage, ClockConfig, CoreVoltage};
use embassy_rp::config::Config;
use embassy_rp::gpio::{Level, Output};
use embassy_time::{Duration, Instant, Timer};
use {defmt_rtt as _, panic_probe as _};
const COUNT_TO: i64 = 10_000_000;
#[embassy_executor::main]
async fn main(_spawner: Spawner) -> ! {
// Set up for clock frequency of 200 MHz, setting all necessary defaults.
let mut config = Config::new(ClockConfig::system_freq(200_000_000));
// since for the rp235x there is no official support for higher clock frequencies, `system_freq()` will not set a voltage for us.
// We need to guess the core voltage, that is needed for the higher clock frequency. Going with a small increase from the default 1.1V here, based on
// what we know about the RP2040. This is not guaranteed to be correct.
config.clocks.core_voltage = CoreVoltage::V1_15;
// Initialize the peripherals
let p = embassy_rp::init(config);
// Show CPU frequency for verification
let sys_freq = clk_sys_freq();
info!("System clock frequency: {} MHz", sys_freq / 1_000_000);
// Show core voltage for verification
let core_voltage = core_voltage().unwrap();
info!("Core voltage: {}", Debug2Format(&core_voltage));
// LED to indicate the system is running
let mut led = Output::new(p.PIN_25, Level::Low);
loop {
// Reset the counter at the start of measurement period
let mut counter = 0;
// Turn LED on while counting
led.set_high();
let start = Instant::now();
// This is a busy loop that will take some time to complete
while counter < COUNT_TO {
counter += 1;
}
let elapsed = Instant::now() - start;
// Report the elapsed time
led.set_low();
info!(
"At {}Mhz: Elapsed time to count to {}: {}ms",
sys_freq / 1_000_000,
counter,
elapsed.as_millis()
);
// Wait 2 seconds before starting the next measurement
Timer::after(Duration::from_secs(2)).await;
}
}

49
tests/rp/src/bin/overclock.rs
View File

@ -7,14 +7,8 @@ teleprobe_meta::target!(b"rpi-pico");
teleprobe_meta::target!(b"pimoroni-pico-plus-2");
use defmt::info;
#[cfg(feature = "rp2040")]
use defmt::{assert, assert_eq};
use embassy_executor::Spawner;
use embassy_rp::clocks;
#[cfg(feature = "rp2040")]
use embassy_rp::clocks::ClockConfig;
#[cfg(feature = "rp2040")]
use embassy_rp::clocks::CoreVoltage;
use embassy_rp::clocks::{clk_sys_freq, core_voltage, ClockConfig, CoreVoltage};
use embassy_rp::config::Config;
use embassy_time::Instant;
use {defmt_rtt as _, panic_probe as _};
@ -23,23 +17,26 @@ const COUNT_TO: i64 = 10_000_000;
#[embassy_executor::main]
async fn main(_spawner: Spawner) {
#[cfg(feature = "rp2040")]
let mut config = Config::default();
#[cfg(not(feature = "rp2040"))]
let config = Config::default();
// Initialize with 200MHz clock configuration for RP2040, other chips will use default clock
#[cfg(feature = "rp2040")]
// Initialize with 200MHz clock configuration
config.clocks = ClockConfig::system_freq(200_000_000);
// if we are rp235x, we need to manually set the core voltage. rp2040 should do this automatically
#[cfg(feature = "rp235xb")]
{
config.clocks = ClockConfig::system_freq(200_000_000);
let voltage = config.clocks.core_voltage;
assert!(matches!(voltage, CoreVoltage::V1_15), "Expected voltage scale V1_15");
config.clocks.core_voltage = CoreVoltage::V1_15;
}
let _p = embassy_rp::init(config);
// We should be at core voltage of 1.15V
assert_eq!(core_voltage().unwrap(), CoreVoltage::V1_15, "Core voltage is not 1.15V");
// We should be at 200MHz
assert_eq!(clk_sys_freq(), 200_000_000, "System clock frequency is not 200MHz");
// Test the system speed
let (time_elapsed, clk_sys_freq) = {
let time_elapsed = {
let mut counter = 0;
let start = Instant::now();
while counter < COUNT_TO {
@ -47,24 +44,26 @@ async fn main(_spawner: Spawner) {
}
let elapsed = Instant::now() - start;
(elapsed.as_millis(), clocks::clk_sys_freq())
elapsed.as_millis()
};
// Report the elapsed time, so that the compiler doesn't optimize it away for chips other than RP2040
// Tests will fail if unused variables are detected:
// Report the elapsed time, so that the compiler doesn't optimize it away for the chip not on test
info!(
"At {}Mhz: Elapsed time to count to {}: {}ms",
clk_sys_freq / 1_000_000,
clk_sys_freq() / 1_000_000,
COUNT_TO,
time_elapsed
);
// Check if the elapsed time is within expected limits
// for rp2040 we expect about 600ms
#[cfg(feature = "rp2040")]
{
// we should be at 200MHz
assert_eq!(clk_sys_freq, 200_000_000, "System clock frequency is not 200MHz");
// At 200MHz, the time to count to 10_000_000 should be at 600ms, testing with 1% margin
assert!(time_elapsed <= 606, "Elapsed time is too long");
}
// allow 1% error
assert!(time_elapsed < 606, "Elapsed time is too long");
// for rp235x we expect about 450ms
#[cfg(feature = "rp235xb")]
assert!(time_elapsed < 455, "Elapsed time is too long");
cortex_m::asm::bkpt();
}