Use metadata to define LP peripheral FIFO sizes (#3812)

esp-hal/README.md

@@ -64,6 +64,7 @@ For help getting started with this HAL, please refer to [The Rust on ESP Book] a
 | GPIO               | ✔️   | ✔️      | ✔️      | ✔️      | ✔️      | ✔️      | ✔️      |
 | HMAC               |       |          | ⚒️      | ⚒️      | ⚒️      | ⚒️      | ⚒️      |
 | I2C master         | ✔️   | ✔️      | ✔️      | ✔️      | ✔️      | ✔️      | ✔️      |
+| LP I2C master      |       |          |          | ⚒️      |          |          |          |
 | I2C slave          | ❌    |          | ❌       | ❌       | ❌       | ❌       | ❌       |
 | I2S                | ⚒️   |          | ⚒️      | ⚒️      | ⚒️      | ⚒️      | ⚒️      |
 | Interrupts         | ⚒️   | ⚒️      | ⚒️      | ⚒️      | ⚒️      | ⚒️      | ⚒️      |
@@ -90,6 +91,7 @@ For help getting started with this HAL, please refer to [The Rust on ESP Book] a
 | Touch              | ⚒️   |          |          |          |          | ❌       | ❌       |
 | TWAI               | ⚒️   |          | ⚒️      | ⚒️      | ⚒️      | ⚒️      | ⚒️      |
 | UART               | ✔️   | ✔️      | ✔️      | ✔️      | ✔️      | ✔️      | ✔️      |
+| LP UART            |       |          |          | ⚒️      |          |          |          |
 | ULP (FSM)          | ⚒️   |          |          |          |          | ⚒️      | ⚒️      |
 | ULP (RISC-V)       |       |          |          | ⚒️      |          | ⚒️      | ⚒️      |
 | USB OTG FS         |       |          |          |          |          | ⚒️      | ⚒️      |

esp-hal/src/uart.rs

@@ -2340,7 +2340,7 @@ pub(super) fn intr_handler(uart: &Info, state: &State) {
 }
 
 /// Low-power UART
-#[cfg(soc_has_lp_uart)]
+#[cfg(lp_uart)]
 #[instability::unstable]
 pub mod lp_uart {
     use crate::{
@@ -2631,8 +2631,8 @@ pub struct State {
 impl Info {
     // Currently we don't support merging adjacent FIFO memory, so the max size is
     // 128 bytes, the max threshold is 127 bytes.
-    const UART_FIFO_SIZE: u16 = 128;
+    const UART_FIFO_SIZE: u16 = property!("uart.ram_size");
-    const RX_FIFO_MAX_THRHD: u16 = 127;
+    const RX_FIFO_MAX_THRHD: u16 = Self::UART_FIFO_SIZE - 1;
     const TX_FIFO_MAX_THRHD: u16 = Self::RX_FIFO_MAX_THRHD;
 
     /// Returns the register block for this UART instance.

esp-lp-hal/CHANGELOG.md

@@ -15,6 +15,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 ### Fixed
 
+- Fixed size of LP_UART's RAM block (#3812)
 
 ### Removed
 

esp-lp-hal/Cargo.toml

@@ -31,10 +31,14 @@ esp32s3-ulp       = { version = "0.3.0", features = ["critical-section"], option
 nb                = { version = "1.1.0",  optional = true }
 procmacros        = { version = "0.19.0", package = "esp-hal-procmacros", path = "../esp-hal-procmacros" }
 riscv             = { version = "0.11.1", features = ["critical-section-single-hart"] }
+esp-metadata-generated = { version = "0.1.0", path = "../esp-metadata-generated" }
 
 [dev-dependencies]
 panic-halt = "0.2.0"
 
+[build-dependencies]
+esp-metadata-generated = { version = "0.1.0", path = "../esp-metadata-generated", features = ["build-script"] }
+
 [features]
 default = ["embedded-hal"]
 
@@ -47,11 +51,11 @@ debug = [
 
 # Chip Support Feature Flags
 # Target the ESP32-C6.
-esp32c6 = ["dep:esp32c6-lp",  "procmacros/is-lp-core", "dep:nb"]
+esp32c6 = ["dep:esp32c6-lp",  "esp-metadata-generated/esp32c6", "procmacros/is-lp-core", "dep:nb"]
 # Target the ESP32-S2.
-esp32s2 = ["dep:esp32s2-ulp", "procmacros/is-ulp-core"]
+esp32s2 = ["dep:esp32s2-ulp", "esp-metadata-generated/esp32s2", "procmacros/is-ulp-core"]
 # Target the ESP32-S3.
-esp32s3 = ["dep:esp32s3-ulp", "procmacros/is-ulp-core"]
+esp32s3 = ["dep:esp32s3-ulp", "esp-metadata-generated/esp32s3", "procmacros/is-ulp-core"]
 
 #! ### Trait Implementation Feature Flags
 ## Implement the traits defined in the `1.0.0` releases of `embedded-hal` and

esp-lp-hal/build.rs

@@ -1,48 +1,26 @@
 use std::{env, error::Error, fs, path::PathBuf};
 
-#[macro_export]
+use esp_metadata_generated::Chip;
-macro_rules! assert_unique_used_features {
-    ($($feature:literal),+ $(,)?) => {
-        assert!(
-            (0 $(+ cfg!(feature = $feature) as usize)+ ) == 1,
-            "Exactly one of the following features must be enabled: {}",
-            [$($feature),+].join(", ")
-        );
-    };
-}
 
 fn main() -> Result<(), Box<dyn Error>> {
-    // NOTE: update when adding new device support!
-    // Ensure that exactly one chip has been specified:
-    assert_unique_used_features!("esp32c6", "esp32s2", "esp32s3");
-
-    // NOTE: update when adding new device support!
     // Determine the name of the configured device:
-    let device_name = if cfg!(feature = "esp32c6") {
+    let chip = Chip::from_cargo_feature()?;
-        "esp32c6"
-    } else if cfg!(feature = "esp32s2") {
-        "esp32s2"
-    } else if cfg!(feature = "esp32s3") {
-        "esp32s3"
-    } else {
-        unreachable!() // We've confirmed exactly one known device was selected
-    };
 
     // Define all necessary configuration symbols for the configured device:
-    println!("cargo:rustc-cfg={device_name}");
+    chip.define_cfgs();
+
+    // Copy the required linker script to the `out` directory:
+    let source_file = match chip {
+        Chip::Esp32c6 => "ld/link-lp.x",
+        Chip::Esp32s2 | Chip::Esp32s3 => "ld/link-ulp.x",
+        _ => unreachable!(),
+    };
 
     // Put the linker script somewhere the linker can find it:
     let out = PathBuf::from(env::var_os("OUT_DIR").unwrap());
     println!("cargo:rustc-link-search={}", out.display());
-
+    fs::copy(source_file, out.join("link.x"))?;
-    // Copy the required linker script to the `out` directory:
-    if cfg!(feature = "esp32c6") {
-        fs::copy("ld/link-lp.x", out.join("link.x"))?;
-        println!("cargo:rerun-if-changed=ld/link-lp.x");
-    } else if cfg!(feature = "esp32s2") || cfg!(feature = "esp32s3") {
-        fs::copy("ld/link-ulp.x", out.join("link.x"))?;
     println!("cargo:rerun-if-changed=ld/link-ulp.x");
-    }
 
     // Done!
     Ok(())

esp-lp-hal/src/i2c.rs

@@ -12,7 +12,7 @@ const I2C_LL_INTR_MASK: u32 = (1 << LP_I2C_TRANS_COMPLETE_INT_ST_S)
     | (1 << LP_I2C_END_DETECT_INT_ST_S)
     | (1 << LP_I2C_NACK_INT_ST_S);
 
-const LP_I2C_FIFO_LEN: u32 = 16;
+const LP_I2C_FIFO_LEN: u32 = property!("lp_i2c_master.fifo_size");
 
 #[doc(hidden)]
 pub unsafe fn conjure() -> LpI2c {

esp-lp-hal/src/lib.rs

@@ -18,13 +18,17 @@
 #![deny(missing_docs)]
 #![no_std]
 
+#[allow(unused_imports, reason = "Only used for some MCUs currently")]
+#[macro_use]
+extern crate esp_metadata_generated;
+
 use core::arch::global_asm;
 
 pub mod delay;
 pub mod gpio;
-#[cfg(esp32c6)]
+#[cfg(lp_i2c_master)]
 pub mod i2c;
-#[cfg(esp32c6)]
+#[cfg(lp_uart)]
 pub mod uart;
 
 #[cfg(feature = "esp32c6")]

esp-lp-hal/src/uart.rs

@@ -36,7 +36,7 @@
 
 use crate::pac::LP_UART;
 
-const UART_FIFO_SIZE: u16 = 128;
+const UART_FIFO_SIZE: u16 = property!("lp_uart.ram_size");
 
 #[doc(hidden)]
 pub unsafe fn conjure() -> LpUart {

esp-metadata-generated/src/_build_script_utils.rs

@@ -278,6 +278,7 @@ impl Chip {
                     "rmt_ram_start=\"1073047552\"",
                     "rmt_channel_ram_size=\"64\"",
                     "timergroup_timg_has_timer1",
+                    "uart_ram_size=\"128\"",
                     "has_dram_region",
                 ],
                 cfgs: &[
@@ -419,6 +420,7 @@ impl Chip {
                     "cargo:rustc-cfg=rmt_ram_start=\"1073047552\"",
                     "cargo:rustc-cfg=rmt_channel_ram_size=\"64\"",
                     "cargo:rustc-cfg=timergroup_timg_has_timer1",
+                    "cargo:rustc-cfg=uart_ram_size=\"128\"",
                     "cargo:rustc-cfg=has_dram_region",
                 ],
             },
@@ -524,6 +526,7 @@ impl Chip {
                     "i2c_master_ll_intr_mask=\"262143\"",
                     "i2c_master_fifo_size=\"16\"",
                     "interrupts_status_registers=\"2\"",
+                    "uart_ram_size=\"128\"",
                     "has_dram_region",
                 ],
                 cfgs: &[
@@ -625,6 +628,7 @@ impl Chip {
                     "cargo:rustc-cfg=i2c_master_ll_intr_mask=\"262143\"",
                     "cargo:rustc-cfg=i2c_master_fifo_size=\"16\"",
                     "cargo:rustc-cfg=interrupts_status_registers=\"2\"",
+                    "cargo:rustc-cfg=uart_ram_size=\"128\"",
                     "cargo:rustc-cfg=has_dram_region",
                 ],
             },
@@ -750,6 +754,7 @@ impl Chip {
                     "interrupts_status_registers=\"2\"",
                     "rmt_ram_start=\"1610703872\"",
                     "rmt_channel_ram_size=\"48\"",
+                    "uart_ram_size=\"128\"",
                     "has_dram_region",
                 ],
                 cfgs: &[
@@ -871,6 +876,7 @@ impl Chip {
                     "cargo:rustc-cfg=interrupts_status_registers=\"2\"",
                     "cargo:rustc-cfg=rmt_ram_start=\"1610703872\"",
                     "cargo:rustc-cfg=rmt_channel_ram_size=\"48\"",
+                    "cargo:rustc-cfg=uart_ram_size=\"128\"",
                     "cargo:rustc-cfg=has_dram_region",
                 ],
             },
@@ -990,6 +996,7 @@ impl Chip {
                     "gpio",
                     "hmac",
                     "i2c_master",
+                    "lp_i2c_master",
                     "i2s",
                     "interrupts",
                     "io_mux",
@@ -1010,6 +1017,7 @@ impl Chip {
                     "timergroup",
                     "twai",
                     "uart",
+                    "lp_uart",
                     "ulp_riscv",
                     "usb_serial_jtag",
                     "wifi",
@@ -1043,9 +1051,12 @@ impl Chip {
                     "i2c_master_max_bus_timeout=\"31\"",
                     "i2c_master_ll_intr_mask=\"262143\"",
                     "i2c_master_fifo_size=\"32\"",
+                    "lp_i2c_master_fifo_size=\"16\"",
                     "interrupts_status_registers=\"3\"",
                     "rmt_ram_start=\"1610638336\"",
                     "rmt_channel_ram_size=\"48\"",
+                    "uart_ram_size=\"128\"",
+                    "lp_uart_ram_size=\"32\"",
                     "wifi_has_wifi6",
                     "has_dram_region",
                 ],
@@ -1162,6 +1173,7 @@ impl Chip {
                     "cargo:rustc-cfg=gpio",
                     "cargo:rustc-cfg=hmac",
                     "cargo:rustc-cfg=i2c_master",
+                    "cargo:rustc-cfg=lp_i2c_master",
                     "cargo:rustc-cfg=i2s",
                     "cargo:rustc-cfg=interrupts",
                     "cargo:rustc-cfg=io_mux",
@@ -1182,6 +1194,7 @@ impl Chip {
                     "cargo:rustc-cfg=timergroup",
                     "cargo:rustc-cfg=twai",
                     "cargo:rustc-cfg=uart",
+                    "cargo:rustc-cfg=lp_uart",
                     "cargo:rustc-cfg=ulp_riscv",
                     "cargo:rustc-cfg=usb_serial_jtag",
                     "cargo:rustc-cfg=wifi",
@@ -1215,9 +1228,12 @@ impl Chip {
                     "cargo:rustc-cfg=i2c_master_max_bus_timeout=\"31\"",
                     "cargo:rustc-cfg=i2c_master_ll_intr_mask=\"262143\"",
                     "cargo:rustc-cfg=i2c_master_fifo_size=\"32\"",
+                    "cargo:rustc-cfg=lp_i2c_master_fifo_size=\"16\"",
                     "cargo:rustc-cfg=interrupts_status_registers=\"3\"",
                     "cargo:rustc-cfg=rmt_ram_start=\"1610638336\"",
                     "cargo:rustc-cfg=rmt_channel_ram_size=\"48\"",
+                    "cargo:rustc-cfg=uart_ram_size=\"128\"",
+                    "cargo:rustc-cfg=lp_uart_ram_size=\"32\"",
                     "cargo:rustc-cfg=wifi_has_wifi6",
                     "cargo:rustc-cfg=has_dram_region",
                 ],
@@ -1373,6 +1389,7 @@ impl Chip {
                     "interrupts_status_registers=\"2\"",
                     "rmt_ram_start=\"1610642432\"",
                     "rmt_channel_ram_size=\"48\"",
+                    "uart_ram_size=\"128\"",
                     "has_dram_region",
                 ],
                 cfgs: &[
@@ -1523,6 +1540,7 @@ impl Chip {
                     "cargo:rustc-cfg=interrupts_status_registers=\"2\"",
                     "cargo:rustc-cfg=rmt_ram_start=\"1610642432\"",
                     "cargo:rustc-cfg=rmt_channel_ram_size=\"48\"",
+                    "cargo:rustc-cfg=uart_ram_size=\"128\"",
                     "cargo:rustc-cfg=has_dram_region",
                 ],
             },
@@ -1669,6 +1687,7 @@ impl Chip {
                     "rmt_channel_ram_size=\"64\"",
                     "spi_master_has_octal",
                     "timergroup_timg_has_timer1",
+                    "uart_ram_size=\"128\"",
                     "has_dram_region",
                 ],
                 cfgs: &[
@@ -1811,6 +1830,7 @@ impl Chip {
                     "cargo:rustc-cfg=rmt_channel_ram_size=\"64\"",
                     "cargo:rustc-cfg=spi_master_has_octal",
                     "cargo:rustc-cfg=timergroup_timg_has_timer1",
+                    "cargo:rustc-cfg=uart_ram_size=\"128\"",
                     "cargo:rustc-cfg=has_dram_region",
                 ],
             },
@@ -1977,6 +1997,7 @@ impl Chip {
                     "rmt_channel_ram_size=\"48\"",
                     "spi_master_has_octal",
                     "timergroup_timg_has_timer1",
+                    "uart_ram_size=\"128\"",
                     "has_dram_region",
                 ],
                 cfgs: &[
@@ -2139,6 +2160,7 @@ impl Chip {
                     "cargo:rustc-cfg=rmt_channel_ram_size=\"48\"",
                     "cargo:rustc-cfg=spi_master_has_octal",
                     "cargo:rustc-cfg=timergroup_timg_has_timer1",
+                    "cargo:rustc-cfg=uart_ram_size=\"128\"",
                     "cargo:rustc-cfg=has_dram_region",
                 ],
             },
@@ -2372,7 +2394,9 @@ impl Config {
         println!("cargo:rustc-check-cfg=cfg(lp_core)");
         println!("cargo:rustc-check-cfg=cfg(pm_support_beacon_wakeup)");
         println!("cargo:rustc-check-cfg=cfg(etm)");
+        println!("cargo:rustc-check-cfg=cfg(lp_i2c_master)");
         println!("cargo:rustc-check-cfg=cfg(parl_io)");
+        println!("cargo:rustc-check-cfg=cfg(lp_uart)");
         println!("cargo:rustc-check-cfg=cfg(ulp_riscv)");
         println!("cargo:rustc-check-cfg=cfg(ieee802154)");
         println!("cargo:rustc-check-cfg=cfg(i2c_master_can_estimate_nack_reason)");
@@ -2430,6 +2454,9 @@ impl Config {
             "cargo:rustc-check-cfg=cfg(rmt_ram_start, values(\"1073047552\",\"1610703872\",\"1610638336\",\"1610642432\",\"1061250048\",\"1610704896\"))"
         );
         println!("cargo:rustc-check-cfg=cfg(rmt_channel_ram_size, values(\"64\",\"48\"))");
+        println!("cargo:rustc-check-cfg=cfg(uart_ram_size, values(\"128\"))");
+        println!("cargo:rustc-check-cfg=cfg(lp_i2c_master_fifo_size, values(\"16\"))");
+        println!("cargo:rustc-check-cfg=cfg(lp_uart_ram_size, values(\"32\"))");
         for cfg in self.cfgs {
             println!("{cfg}");
         }

esp-metadata-generated/src/_generated_esp32.rs

@@ -156,6 +156,12 @@ macro_rules! property {
     ("timergroup.timg_has_timer1") => {
         true
     };
+    ("uart.ram_size") => {
+        128
+    };
+    ("uart.ram_size", str) => {
+        stringify!(128)
+    };
     ("wifi.has_wifi6") => {
         false
     };

esp-metadata-generated/src/_generated_esp32c2.rs

@@ -144,6 +144,12 @@ macro_rules! property {
     ("timergroup.timg_has_timer1") => {
         false
     };
+    ("uart.ram_size") => {
+        128
+    };
+    ("uart.ram_size", str) => {
+        stringify!(128)
+    };
     ("wifi.has_wifi6") => {
         false
     };

esp-metadata-generated/src/_generated_esp32c3.rs

@@ -156,6 +156,12 @@ macro_rules! property {
     ("timergroup.timg_has_timer1") => {
         false
     };
+    ("uart.ram_size") => {
+        128
+    };
+    ("uart.ram_size", str) => {
+        stringify!(128)
+    };
     ("wifi.has_wifi6") => {
         false
     };

esp-metadata-generated/src/_generated_esp32c6.rs

@@ -132,6 +132,12 @@ macro_rules! property {
     ("i2c_master.fifo_size", str) => {
         stringify!(32)
     };
+    ("lp_i2c_master.fifo_size") => {
+        16
+    };
+    ("lp_i2c_master.fifo_size", str) => {
+        stringify!(16)
+    };
     ("interrupts.status_registers") => {
         3
     };
@@ -156,6 +162,18 @@ macro_rules! property {
     ("timergroup.timg_has_timer1") => {
         false
     };
+    ("uart.ram_size") => {
+        128
+    };
+    ("uart.ram_size", str) => {
+        stringify!(128)
+    };
+    ("lp_uart.ram_size") => {
+        32
+    };
+    ("lp_uart.ram_size", str) => {
+        stringify!(32)
+    };
     ("wifi.has_wifi6") => {
         true
     };

esp-metadata-generated/src/_generated_esp32h2.rs

@@ -156,6 +156,12 @@ macro_rules! property {
     ("timergroup.timg_has_timer1") => {
         false
     };
+    ("uart.ram_size") => {
+        128
+    };
+    ("uart.ram_size", str) => {
+        stringify!(128)
+    };
 }
 /// Macro to get the address range of the given memory region.
 #[macro_export]

esp-metadata-generated/src/_generated_esp32s2.rs

@@ -156,6 +156,12 @@ macro_rules! property {
     ("timergroup.timg_has_timer1") => {
         true
     };
+    ("uart.ram_size") => {
+        128
+    };
+    ("uart.ram_size", str) => {
+        stringify!(128)
+    };
     ("wifi.has_wifi6") => {
         false
     };

esp-metadata-generated/src/_generated_esp32s3.rs

@@ -156,6 +156,12 @@ macro_rules! property {
     ("timergroup.timg_has_timer1") => {
         true
     };
+    ("uart.ram_size") => {
+        128
+    };
+    ("uart.ram_size", str) => {
+        stringify!(128)
+    };
     ("wifi.has_wifi6") => {
         false
     };

esp-metadata/devices/esp32.toml

@@ -607,6 +607,7 @@ instances = [
     { name = "uart1", sys_instance = "Uart1", tx = "U1TXD", rx = "U1RXD", cts = "U1CTS", rts = "U1RTS" },
     { name = "uart2", sys_instance = "Uart2", tx = "U2TXD", rx = "U2RXD", cts = "U2CTS", rts = "U2RTS" },
 ]
+ram_size = 128
 
 [device.ethernet]
 support_status = "not_supported"

esp-metadata/devices/esp32c2.toml

@@ -261,6 +261,7 @@ instances = [
     { name = "uart0", sys_instance = "Uart0", tx = "U0TXD", rx = "U0RXD", cts = "U0CTS", rts = "U0RTS" },
     { name = "uart1", sys_instance = "Uart1", tx = "U1TXD", rx = "U1RXD", cts = "U1CTS", rts = "U1RTS" },
 ]
+ram_size = 128
 
 # Other drivers which are partially supported but have no other configuration:
 

esp-metadata/devices/esp32c3.toml

@@ -307,6 +307,7 @@ instances = [
     { name = "uart0", sys_instance = "Uart0", tx = "U0TXD", rx = "U0RXD", cts = "U0CTS", rts = "U0RTS" },
     { name = "uart1", sys_instance = "Uart1", tx = "U1TXD", rx = "U1RXD", cts = "U1CTS", rts = "U1RTS" },
 ]
+ram_size = 128
 
 [device.ds]
 support_status = "not_supported"

esp-metadata/devices/esp32c6.toml

@@ -425,6 +425,10 @@ has_arbitration_en = true
 has_tx_fifo_watermark = true
 bus_timeout_is_exponential = true
 
+[device.lp_i2c_master]
+support_status = "partial"
+fifo_size = 16
+
 [device.i2c_slave]
 support_status = "not_supported"
 
@@ -457,6 +461,11 @@ instances = [
     { name = "uart0", sys_instance = "Uart0", tx = "U0TXD", rx = "U0RXD", cts = "U0CTS", rts = "U0RTS" },
     { name = "uart1", sys_instance = "Uart1", tx = "U1TXD", rx = "U1RXD", cts = "U1CTS", rts = "U1RTS" },
 ]
+ram_size = 128
+
+[device.lp_uart]
+support_status = "partial"
+ram_size = 32
 
 [device.ds]
 support_status = "not_supported"

esp-metadata/devices/esp32h2.toml

@@ -378,6 +378,7 @@ instances = [
     { name = "uart0", sys_instance = "Uart0", tx = "U0TXD", rx = "U0RXD", cts = "U0CTS", rts = "U0RTS" },
     { name = "uart1", sys_instance = "Uart1", tx = "U1TXD", rx = "U1RXD", cts = "U1CTS", rts = "U1RTS" },
 ]
+ram_size = 128
 
 [device.ds]
 support_status = "not_supported"

esp-metadata/devices/esp32s2.toml

@@ -429,6 +429,7 @@ instances = [
     { name = "uart0", sys_instance = "Uart0", tx = "U0TXD", rx = "U0RXD", cts = "U0CTS", rts = "U0RTS" },
     { name = "uart1", sys_instance = "Uart1", tx = "U1TXD", rx = "U1RXD", cts = "U1CTS", rts = "U1RTS" },
 ]
+ram_size = 128
 
 [device.rgb_display] # via SPI and I2S
 support_status = "not_supported"

esp-metadata/devices/esp32s3.toml

@@ -605,6 +605,7 @@ instances = [
     { name = "uart1", sys_instance = "Uart1", tx = "U1TXD", rx = "U1RXD", cts = "U1CTS", rts = "U1RTS" },
     { name = "uart2", sys_instance = "Uart2", tx = "U2TXD", rx = "U2RXD", cts = "U2CTS", rts = "U2RTS" },
 ]
+ram_size = 128
 
 [device.touch]
 support_status = "not_supported"

esp-metadata/src/cfg.rs

@@ -329,6 +329,13 @@ driver_configs![
             fifo_size: u32,
         }
     },
+    LpI2cMasterProperties {
+        driver: lp_i2c_master,
+        name: "LP I2C master",
+        properties: {
+            fifo_size: u32,
+        }
+    },
     I2cSlaveProperties {
         driver: i2c_slave,
         name: "I2C slave",
@@ -468,7 +475,16 @@ driver_configs![
     UartProperties<UartInstanceConfig> {
         driver: uart,
         name: "UART",
-        properties: {}
+        properties: {
+            ram_size: u32,
+        }
+    },
+    LpUartProperties {
+        driver: lp_uart,
+        name: "LP UART",
+        properties: {
+            ram_size: u32,
+        }
     },
     UlpFsmProperties {
         driver: ulp_fsm,