esp-hal/hil-test/tests/rmt.rs

//! RMT Loopback Test

//% CHIPS: esp32 esp32c3 esp32c6 esp32h2 esp32s2 esp32s3

#![no_std]
#![no_main]

use esp_hal::{
    prelude::*,
    rmt::{PulseCode, Rmt, RxChannel, RxChannelConfig, TxChannel, TxChannelConfig},
};
use hil_test as _;

#[cfg(test)]
#[embedded_test::tests]
mod tests {
    use esp_hal::rmt::Error;

    use super::*;

    #[init]
    fn init() {}

    #[test]
    #[timeout(1)]
    fn rmt_loopback() {
        let peripherals = esp_hal::init(esp_hal::Config::default());

        cfg_if::cfg_if! {
            if #[cfg(feature = "esp32h2")] {
                let freq = 32.MHz();
            } else {
                let freq = 80.MHz();
            }
        };

        let rmt = Rmt::new(peripherals.RMT, freq).unwrap();

        let (rx, tx) = hil_test::common_test_pins!(peripherals);

        let tx_config = TxChannelConfig {
            clk_divider: 255,
            ..TxChannelConfig::default()
        };

        let tx_channel = {
            use esp_hal::rmt::TxChannelCreator;
            rmt.channel0.configure(tx, tx_config).unwrap()
        };

        let rx_config = RxChannelConfig {
            clk_divider: 255,
            idle_threshold: 1000,
            ..RxChannelConfig::default()
        };

        cfg_if::cfg_if! {
            if #[cfg(feature = "esp32")] {
                let  rx_channel = {
                    use esp_hal::rmt::RxChannelCreator;
                    rmt.channel1.configure(rx, rx_config).unwrap()
                };
            } else if #[cfg(feature = "esp32s2")] {
                let rx_channel = {
                    use esp_hal::rmt::RxChannelCreator;
                    rmt.channel1.configure(rx, rx_config).unwrap()
                };
            } else if #[cfg(feature = "esp32s3")] {
                let  rx_channel = {
                    use esp_hal::rmt::RxChannelCreator;
                    rmt.channel7.configure(rx, rx_config).unwrap()
                };
            } else {
                let  rx_channel = {
                    use esp_hal::rmt::RxChannelCreator;
                    rmt.channel2.configure(rx, rx_config).unwrap()
                };
            }
        }

        let mut tx_data = [PulseCode::new(true, 200, false, 50); 20];

        tx_data[tx_data.len() - 2] = PulseCode::new(true, 3000, false, 500);
        tx_data[tx_data.len() - 1] = PulseCode::empty();

        let mut rcv_data: [u32; 20] = [PulseCode::empty(); 20];

        let rx_transaction = rx_channel.receive(&mut rcv_data).unwrap();
        let tx_transaction = tx_channel.transmit(&tx_data).unwrap();

        rx_transaction.wait().unwrap();
        tx_transaction.wait().unwrap();

        // the last two pulse-codes are the ones which wait for the timeout so
        // they can't be equal
        assert_eq!(&tx_data[..18], &rcv_data[..18]);
    }

    #[test]
    #[timeout(1)]
    fn rmt_single_shot_fails_without_end_marker() {
        let peripherals = esp_hal::init(esp_hal::Config::default());

        let io = Io::new(peripherals.GPIO, peripherals.IO_MUX);

        cfg_if::cfg_if! {
            if #[cfg(feature = "esp32h2")] {
                let freq = 32.MHz();
            } else {
                let freq = 80.MHz();
            }
        };

        let rmt = Rmt::new(peripherals.RMT, freq).unwrap();

        let (_, tx) = hil_test::common_test_pins!(io);

        let tx_config = TxChannelConfig {
            clk_divider: 255,
            ..TxChannelConfig::default()
        };

        let tx_channel = {
            use esp_hal::rmt::TxChannelCreator;
            rmt.channel0.configure(tx, tx_config).unwrap()
        };

        let tx_data = [PulseCode::new(true, 200, false, 50); 20];

        let tx_transaction = tx_channel.transmit(&tx_data);

        assert!(tx_transaction.is_err());
        assert!(matches!(tx_transaction, Err(Error::EndMarkerMissing)));
    }
}