mirror of
https://github.com/esp-rs/esp-hal.git
synced 2025-10-01 22:31:23 +00:00
91ea205446
* esp32: Fix typo in Frequency word in some identifiers Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> * esp32c3: Add support for PLL clock configuration Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> * clock: Move definition of Clock types to common level Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> * esp32c3: Add support for RTC Clock configuration Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> * esp32c3: Add example for the RTC Watchdog Timer driver Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
102 lines
2.8 KiB
Rust
102 lines
2.8 KiB
Rust
//! This shows some of the interrupts that can be generated by UART/Serial.
|
|
//! Use a proper serial terminal to connect to the board (espmonitor and
|
|
//! espflash won't work)
|
|
|
|
#![no_std]
|
|
#![no_main]
|
|
|
|
use core::{cell::RefCell, fmt::Write};
|
|
|
|
use esp32_hal::{
|
|
clock::ClockControl,
|
|
interrupt,
|
|
pac::{self, Peripherals, UART0},
|
|
prelude::*,
|
|
serial::config::AtCmdConfig,
|
|
timer::TimerGroup,
|
|
Rtc,
|
|
Serial,
|
|
};
|
|
use nb::block;
|
|
use panic_halt as _;
|
|
use xtensa_lx::mutex::{Mutex, SpinLockMutex};
|
|
use xtensa_lx_rt::entry;
|
|
|
|
static mut SERIAL: SpinLockMutex<RefCell<Option<Serial<UART0>>>> =
|
|
SpinLockMutex::new(RefCell::new(None));
|
|
|
|
#[entry]
|
|
fn main() -> ! {
|
|
let peripherals = Peripherals::take().unwrap();
|
|
let system = peripherals.DPORT.split();
|
|
let clocks = ClockControl::boot_defaults(system.clock_control).freeze();
|
|
|
|
// Disable the TIMG watchdog timer.
|
|
let timer_group0 = TimerGroup::new(peripherals.TIMG0, &clocks);
|
|
let mut timer0 = timer_group0.timer0;
|
|
let mut wdt0 = timer_group0.wdt;
|
|
|
|
let timer_group1 = TimerGroup::new(peripherals.TIMG1, &clocks);
|
|
let mut wdt1 = timer_group1.wdt;
|
|
|
|
let mut serial0 = Serial::new(peripherals.UART0);
|
|
let mut rtc = Rtc::new(peripherals.RTC_CNTL);
|
|
|
|
// Disable MWDT and RWDT (Watchdog) flash boot protection
|
|
wdt0.disable();
|
|
wdt1.disable();
|
|
rtc.rwdt.disable();
|
|
|
|
serial0.set_at_cmd(AtCmdConfig::new(None, None, None, b'#', None));
|
|
serial0.set_rx_fifo_full_threshold(30);
|
|
serial0.listen_at_cmd();
|
|
serial0.listen_rx_fifo_full();
|
|
|
|
interrupt::enable(pac::Interrupt::UART0, interrupt::Priority::Priority2).unwrap();
|
|
|
|
timer0.start(1u64.secs());
|
|
|
|
unsafe {
|
|
(&SERIAL).lock(|data| (*data).replace(Some(serial0)));
|
|
}
|
|
|
|
loop {
|
|
unsafe {
|
|
(&SERIAL).lock(|data| {
|
|
let mut serial = data.borrow_mut();
|
|
let serial = serial.as_mut().unwrap();
|
|
writeln!(serial, "Hello World! Send a single `#` character or send at least 30 characters and see the interrupts trigger.").ok();
|
|
});
|
|
}
|
|
|
|
block!(timer0.wait()).unwrap();
|
|
}
|
|
}
|
|
|
|
#[interrupt]
|
|
fn UART0() {
|
|
unsafe {
|
|
(&SERIAL).lock(|data| {
|
|
let mut serial = data.borrow_mut();
|
|
let serial = serial.as_mut().unwrap();
|
|
|
|
let mut cnt = 0;
|
|
while let nb::Result::Ok(_c) = serial.read() {
|
|
cnt += 1;
|
|
}
|
|
writeln!(serial, "Read {} bytes", cnt,).ok();
|
|
|
|
writeln!(
|
|
serial,
|
|
"Interrupt AT-CMD: {} RX-FIFO-FULL: {}",
|
|
serial.at_cmd_interrupt_set(),
|
|
serial.rx_fifo_full_interrupt_set(),
|
|
)
|
|
.ok();
|
|
|
|
serial.reset_at_cmd_interrupt();
|
|
serial.reset_rx_fifo_full_interrupt();
|
|
});
|
|
}
|
|
}
|