Split `autodiff` into `autodiff_forward` and `autodiff_reverse`
This PR splits `#[autodiff]` macro so `#[autodiff(df, Reverse, args)]` would become `#[autodiff_reverse(df, args)]` and `#[autodiff(df, Forward, args)]` would become `#[autodiff_forwad(df, args)]`.
This will allow us to eagerly translate messages on a top-level
diagnostic, such as a `LintDiagnostic`. As a bonus, we can remove the
awkward closure passed into Subdiagnostic and make better use of
`Into`.
- Show the `#![ ... ]` in the span (to make it clear that it should not
be included in the CLI argument)
- Show more detailed errors when the crate has valid token trees but
invalid syntax.
Previously, `crate-attr=feature(foo),feature(bar)` would just say
"invalid crate attribute" and point at the comma. Now, it explicitly
says that the comma was unexpected, which is useful when using
`--error-format=short`. It also fixes the column to show the correct
span.
- Recover from parse errors. Previously we would abort immediately on
syntax errors; now we go on to try and type-check the rest of the
crate.
The new diagnostic code also happens to be slightly shorter.
Use orphaned error code for the same error it belonged to before.
```
error[E0665]: `#[derive(Default)]` on enum with no `#[default]`
--> $DIR/macros-nonfatal-errors.rs:42:10
|
LL | #[derive(Default)]
| ^^^^^^^
LL | / enum NoDeclaredDefault {
LL | | Foo,
LL | | Bar,
LL | | }
| |_- this enum needs a unit variant marked with `#[default]`
|
= note: this error originates in the derive macro `Default` (in Nightly builds, run with -Z macro-backtrace for more info)
help: make this unit variant default by placing `#[default]` on it
|
LL | #[default] Foo,
| ~~~~~~~~~~~~~~
help: make this unit variant default by placing `#[default]` on it
|
LL | #[default] Bar,
| ~~~~~~~~~~~~~~
```
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
Don't allow the `#[pointee]` attribute where it doesn't belong
Error if the `#[pointee]` attribute is applied to anything but generic type parameters.
Closes#128485
Related to #123430
improve error message when `global_asm!` uses `asm!` operands
follow-up to https://github.com/rust-lang/rust/pull/128207
what was
```
error: expected expression, found keyword `in`
--> src/lib.rs:1:31
|
1 | core::arch::global_asm!("{}", in(reg));
| ^^ expected expression
```
becomes
```
error: the `in` operand cannot be used with `global_asm!`
--> $DIR/parse-error.rs:150:19
|
LL | global_asm!("{}", in(reg));
| ^^ the `in` operand is not meaningful for global-scoped inline assembly, remove it
```
the span of the error is just the keyword, which means that we can't create a machine-applicable suggestion here. The alternative would be to attempt to parse the full operand, but then if there are syntax errors in the operand those would be presented to the user, even though the parser already knows that the output won't be valid. Also that would require more complexity in the parser.
So I think this is a nice improvement at very low cost.
This makes it possible for the `unsafe(...)` syntax to only be
valid at the top level, and the `NestedMetaItem`s will automatically
reject `unsafe(...)`.
`#[naked]`: report incompatible attributes
tracking issue: https://github.com/rust-lang/rust/issues/90957
this is a re-implementation of https://github.com/rust-lang/rust/pull/93809 by ``@bstrie`` which was closed 2 years ago due to inactivity.
This PR takes some of the final comments into account, specifically providing a little more context in error messages, and using an allow list to determine which attributes are compatible with `#[naked]`.
Notable attributes that are incompatible with `#[naked]` are:
* `#[inline]`
* `#[track_caller]`
* ~~`#[target_feature]`~~ (this is now allowed, see PR discussion)
* `#[test]`, `#[ignore]`, `#[should_panic]`
These attributes just directly conflict with what `#[naked]` should do.
Naked functions are still important for systems programming, embedded, and operating systems, so I'd like to move them forward.
- merge error codes
- use attribute name that is incompatible in error message
- add test for conditional incompatible attribute
- add `linkage` to the allowlist
These functions are only used in `rustc_builtin_macros`, so it makes
sense for them to live there. This allows them to be changed from `pub`
to `pub(crate)`.
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
