Always fall back to PartialEq when a constant in a pattern is not recursively structural-eq
Right now we destructure the constant as far as we can, but with this PR we just don't take it apart anymore. This is preparatory work for moving to always using valtrees, as these will just do a single conversion of the constant to a valtree at the start, and if that fails, fall back to `PartialEq`.
This removes a few cases where we emitted the `unreachable pattern` lint, because we stop looking into the constant deeply enough to detect that a constant is already covered by another pattern.
Previous work: https://github.com/rust-lang/rust/pull/70743
This is groundwork towards fixing https://github.com/rust-lang/rust/issues/83085 and https://github.com/rust-lang/rust/issues/105047
Suppress "erroneous constant used" for constants tainted by errors
When constant evaluation fails because its MIR is tainted by errors,
suppress note indicating that erroneous constant was used, since those
errors have to be fixed regardless of the constant being used or not.
Fixes#110891.
Document that `missing_copy_implementations` and `missing_debug_implementations` only apply to public items.
I encountered #111359 (fixed) and noticed that the documentation didn't say that it was _intended_ that `missing_debug_implementations` only applies to public items. This PR fixes that, and makes the same wording change to `missing_copy_implementations` which has the same condition.
I chose the words to also be similar to `missing_docs` which already had such a remark.
Recover `impl<T ?Sized>` correctly
Fixes#111327
r? ````@Nilstrieb```` but you can re-roll
Alternatively, happy to close this if we're okay with just saying "sorry #111327 is just a poor side-effect of parser ambiguity" 🤷
Combine three generalizer implementations
Fixes#111092Fixes#109505
This code is a bit delicate and there were subtle changes between them, so I'll leave inline comments where further inspection is needed.
Regarding this comment from #109813 -- "add tests triggering all codepaths: at least the combine and the const generalizer", can't really do that now, and I don't really know how we'd get a higher-ranked const error since non-lifetime binders doesn't *really* support `for<const ..>` (it errors out when you try to use it).
r? `@lcnr`
Remove misleading target feature aliases
Fixes#100752. This is a follow up to #103750. These aliases could not be completely removed until rust-lang/stdarch#1355 landed.
cc `@Amanieu`
Move expansion of query macros in rustc_middle to rustc_middle::query
This moves the expansion of `define_callbacks!` and `define_feedable!` from `rustc_middle::ty::query` to `rustc_middle::query`.
This means that types used in queries are both imported and used in `rustc_middle::query` instead of being split between these modules. It also decouples `rustc_middle::ty::query` further from `rustc_middle` which is helpful since we want to move `rustc_middle::ty::query` to the query system crates.
Simplify find_width_of_character_at_span.
This makes `find_width_of_character_at_span` simpler and more robust against bad spans.
Fixes (but does not close, per beta policy) https://github.com/rust-lang/rust/issues/111485
add util function to TokenStream to eliminate some clones
Another proposed change in the same vein as #111492 trying to get rid of some clones.
This adds a TokenStream helper function so that rustdoc can directly get a chunks iterator over the underlying token trees so that it no longer needs the clones and vec.
Start node has no immediate dominator
Change the immediate_dominator return type to Option, and use None to
indicate that node has no immediate dominator.
Also fix the issue where the start node would be returned as its own
immediate dominator.
Fix the `FileEncoder` buffer size.
It allows a variable size, but in practice we always use the default of 8192 bytes. This commit fixes it to that size, which makes things slightly faster because the size can be hard-wired in generated code.
The commit also:
- Rearranges some buffer capacity checks so they're all in the same form (`x > BUFSIZE`).
- Removes some buffer capacity assertions and comments about them. With an 8192 byte buffer, we're not in any danger of overflowing a `usize`.
r? `@WaffleLapkin`
After seeing a `0`, if it's followed by any of `[0-9]`, `_`, `.`, `e`,
or `E`, we consume all the digits. But in the `.`, `e` and `E` cases
this is pointless because we know there aren't any digits.
Rename const error methods for consistency
renames `ty::Const`'s methods for creating a `ConstKind::Error` to be in the same naming style as `ty::Ty`'s equivalent methods.
r? `@BoxyUwU`
When constant evaluation fails because its MIR is tainted by errors,
suppress note indicating that erroneous constant was used, since those
errors have to be fixed regardless of the constant being used or not.
It allows a variable size, but in practice we always use the default of
8192 bytes. This commit fixes it to that size, which makes things
slightly faster because the size can be hard-wired in generated code.
The commit also:
- Rearranges some buffer capacity checks so they're all in the same form
(`x > BUFSIZE`).
- Removes some buffer capacity assertions and comments about them. With
an 8192 byte buffer, we're not in any danger of overflowing a `usize`.
Change the immediate_dominator return type to Option, and use None to
indicate that node has no immediate dominator.
Also fix the issue where the start node would be returned as its own
immediate dominator.
Use dynamic dispatch for queries
This replaces most concrete query values `V` with `MaybeUninit<[u8; { size_of::<V>() }]>` reducing the code instantiated by queries. The compile time of `rustc_query_impl` is reduced by 27%. It is an alternative to https://github.com/rust-lang/rust/pull/107937 which uses unstable const generics while this uses a `EraseType` trait which maps query values to their erased variant.
This is achieved by introducing an `Erased` type which does sanity check with `cfg(debug_assertions)`. The query caches gets instantiated with these erased types leaving the code in `rustc_query_system` unaware of them. `rustc_query_system` is changed to use instances of `QueryConfig` so that `rustc_query_impl` can pass in `DynamicConfig` which holds a pointer to a virtual table.
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check</td><td align="right">1.7055s</td><td align="right">1.6949s</td><td align="right"> -0.62%</td></tr><tr><td>🟣 <b>hyper</b>:check</td><td align="right">0.2547s</td><td align="right">0.2528s</td><td align="right"> -0.73%</td></tr><tr><td>🟣 <b>regex</b>:check</td><td align="right">0.9590s</td><td align="right">0.9553s</td><td align="right"> -0.39%</td></tr><tr><td>🟣 <b>syn</b>:check</td><td align="right">1.5457s</td><td align="right">1.5440s</td><td align="right"> -0.11%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check</td><td align="right">5.9092s</td><td align="right">5.9009s</td><td align="right"> -0.14%</td></tr><tr><td>Total</td><td align="right">10.3741s</td><td align="right">10.3479s</td><td align="right"> -0.25%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9960s</td><td align="right"> -0.40%</td></tr></table>
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check:initial</td><td align="right">2.0605s</td><td align="right">2.0575s</td><td align="right"> -0.15%</td></tr><tr><td>🟣 <b>hyper</b>:check:initial</td><td align="right">0.3218s</td><td align="right">0.3216s</td><td align="right"> -0.07%</td></tr><tr><td>🟣 <b>regex</b>:check:initial</td><td align="right">1.1848s</td><td align="right">1.1839s</td><td align="right"> -0.07%</td></tr><tr><td>🟣 <b>syn</b>:check:initial</td><td align="right">1.9409s</td><td align="right">1.9376s</td><td align="right"> -0.17%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:initial</td><td align="right">7.3105s</td><td align="right">7.2928s</td><td align="right"> -0.24%</td></tr><tr><td>Total</td><td align="right">12.8185s</td><td align="right">12.7935s</td><td align="right"> -0.20%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">0.9986s</td><td align="right"> -0.14%</td></tr></table>
<table><tr><td rowspan="2">Benchmark</td><td colspan="1"><b>Before</b></th><td colspan="2"><b>After</b></th></tr><tr><td align="right">Time</td><td align="right">Time</td><td align="right">%</th></tr><tr><td>🟣 <b>clap</b>:check:unchanged</td><td align="right">0.4606s</td><td align="right">0.4617s</td><td align="right"> 0.24%</td></tr><tr><td>🟣 <b>hyper</b>:check:unchanged</td><td align="right">0.1335s</td><td align="right">0.1336s</td><td align="right"> 0.08%</td></tr><tr><td>🟣 <b>regex</b>:check:unchanged</td><td align="right">0.3324s</td><td align="right">0.3346s</td><td align="right"> 0.65%</td></tr><tr><td>🟣 <b>syn</b>:check:unchanged</td><td align="right">0.6268s</td><td align="right">0.6307s</td><td align="right"> 0.64%</td></tr><tr><td>🟣 <b>syntex_syntax</b>:check:unchanged</td><td align="right">1.8248s</td><td align="right">1.8508s</td><td align="right">💔 1.43%</td></tr><tr><td>Total</td><td align="right">3.3779s</td><td align="right">3.4113s</td><td align="right"> 0.99%</td></tr><tr><td>Summary</td><td align="right">1.0000s</td><td align="right">1.0061s</td><td align="right"> 0.61%</td></tr></table>
It's based on https://github.com/rust-lang/rust/pull/108167.
r? `@cjgillot`
allow mutating function args through `&raw const`
Fixes https://github.com/rust-lang/rust/issues/111502 by "turning off the sketchy optimization while we figure out if this is ok", like `@JakobDegen` said.
The first commit in this PR removes some suspicious looking logic from the same method, but should have no functional changes, since it doesn't modify the `context` outside of the method. Best reviewed commit by commit.
r? opsem
Allow MIR debuginfo to point to a variable's address
MIR optimizations currently do not to operate on borrowed locals.
When enabling #106285, many borrows will be left as-is because they are used in debuginfo. This pass allows to replace this pattern directly in MIR debuginfo:
```rust
a => _1
_1 = &raw? mut? _2
```
becomes
```rust
a => &_2
// No statement to borrow _2.
```
This pass is implemented as a drive-by in ReferencePropagation MIR pass.
This transformation allows following following MIR opts to treat _2 as an unborrowed local, and optimize it as such, even in builds with debuginfo.
In codegen, when encountering `a => &..&_2`, we create a list of allocas:
```llvm
store ptr %_2.dbg.spill, ptr %a.ref0.dbg.spill
store ptr %a.ref0.dbg.spill, ptr %a.ref1.dbg.spill
...
call void `@llvm.dbg.declare(metadata` ptr %a.ref{n}.dbg.spill, /* ... */)
```
Caveat: this transformation looses the exact type, we do not differentiate `a` as a immutable, mutable reference or a raw pointer. Everything is declared to `*mut` to codegen. I'm not convinced this is a blocker.
Align unsized locals
Allocate an extra space for unsized locals and manually align the storage, since alloca doesn't support dynamic alignment.
Fixes#71416.
Fixes#71695.
