Dániel Buga
8c64b09ba7
Allow configuring longer WDT periods ( #3816 )
...
* Clean up with new PAC
* Allow configuring longer WDT periods
* Enable WDT after updating timeout
2025-07-17 14:50:26 +00:00
Dániel Buga
e146e03c72
Use metadata to define LP peripheral FIFO sizes ( #3812 )
2025-07-17 12:16:24 +00:00
Dániel Buga
3a5aa72c4e
Define analog/LP functions ( #3781 )
...
* Shorten name
* Define analog/rtc functions
* Try to make the data useable
* Remove general pin attributes
* Do not generate unnecessary expanded matchers
* Remove expanded GPIO cases
* Move simplified io_type to where it is used
* Fix RTC IO with resistors calls
* Hide macros on H2
* Define rtcio pins for C2/C3
* Fix S2
* Compare against the correct GPIO number
* Deduplicate
* Restore one waker per pin
* Remove case that is no longer needed, avoid inline(always)
2025-07-11 09:41:50 +00:00
Simon Neuenhausen
3d6e522cbc
Allow splitting control over modem clocks. ( #3687 )
...
* Minimal architecture for split RCC.
* Removed critical section.
* Add all modem clock controllers and adjust esp-ieee802154.
* Fixed incorrect cfg.
* Fixed unstable attribute usage.
* Replaced AtomicU8 with Cell<u8>
* Reverted example channel back to 15
* Added unstable attribute to ModemClockController impls.
* Remember to actually increase the ref count.
* Experimentally removed RadioClockController
* Merged ref counters and made decrease panic if zero is reached.
* Removed RADIO_CLK peripheral.
* Removed RADIO_CLK again.
* Revert "Removed RADIO_CLK again."
This reverts commit 6da2d2834850068aa21bc52b141de2cfd8154acc.
* Removed RADIO_CLK without reformatting the files.
* Applied changes to examples and hil-tests.
* Fixed OS adapter for C2 and H2
* Adjusted docs and used unwrap!
* Fixed comments.
* Added changelog.
* Fixed esp-wifi for esp32h2.
* Changed comment for PHY_CLOCK_REF_COUNTER.
* Fixed lint for esp32c2.
* Update esp-hal/src/clock/mod.rs
Co-authored-by: Dániel Buga <bugadani@gmail.com>
* Update esp-hal/src/clock/mod.rs
Co-authored-by: Dániel Buga <bugadani@gmail.com>
* Removed unnecessary comments and made init_radio_clocks unstable.
* Update esp-hal/src/clock/mod.rs
Co-authored-by: Dániel Buga <bugadani@gmail.com>
* Fixed lint.
* Removed clocks_ll functions for chips that don't have those peripherals.
* fmt
* Changed modem clock controller stealing.
* Added lifetime
* fixed peripheral stealing again
* Made modem_clock_controller not const.
* Used type alias instead of function for peripheral stealing.
* fmt
* Adjusted remaining comments.
* Added note about coex.
* fmt
* misc
* Revert "misc"
This reverts commit d8740421e0dff84af605160939e246f2308a48e1.
* Regenerated esp metadata
---------
Co-authored-by: Dániel Buga <bugadani@gmail.com>
2025-07-08 17:23:55 +00:00
Dániel Buga
1a9b4bafe0
Calculate max input/output signal ID automatically ( #3773 )
2025-07-08 13:39:00 +00:00
Dániel Buga
692a768b3a
Introduce esp-metadata-generated ( #3754 )
...
* Move macros to new crate
* Generate a single file
* Pre-generate esp-metadata-generated
* Move saving code to xtask
* Format with both rustfmt and prettyplease
* Fix doc build
* Unhide macros
* Fix doc string
* Update semver-check baseline
2025-07-07 15:37:05 +00:00
Dániel Buga
9146407573
Fix and extend pin layouts ( #3726 )
...
* Fix ESP32 pin layout
Co-authored-by: rmsyn <github@weathered-steel.dev>
* Tabulate ESP32
* Fix C2 pin layout
* Fix C3 pin layout
* Fix C6 pin layout
Co-authored-by: rmsyn <github@weathered-steel.dev>
* Note AF availability on IoMuxSignal
* Add mising AFs to H2
* Remove unavailable pins
* Add mising signals to S2
* Add mising signals to S3
* Changelog
* Update semver baseline
---------
Co-authored-by: rmsyn <github@weathered-steel.dev>
2025-07-02 13:16:48 +00:00
Dániel Buga
21f1d89f15
Generate peripherals macro call & remove paste ( #3713 )
...
* Expand peripheral metadata
* Generate peripherals macro call
* Remove paste from peripherals
* Add missing peris
* Fix ETM and TRACE0 naming
* Remove redundant tsens symbol
* Remove RTCIO stuff from h2
* Rename S2 RTC_CNTL
* Add missing SYSCON back to S2
* Do not mark the GPIO singleton stable
* Treat unlisted drivers as not available
* Assign stability based on driver info
* Fmt
* Remove unused info
2025-07-01 19:31:21 +00:00
Dániel Buga
8c4878cb03
Refactor AssistDebug symbols ( #3730 )
2025-07-01 14:42:27 +00:00
Dániel Buga
175f4a16b6
Extract SPI metadata ( #3702 )
...
* Extract SPI M/S metadata
* Clean up additional instance trait
* Further SPI cleanups, add OSPI pin setters
* Re-generate semver baseline
* Fix typo
2025-07-01 11:13:26 +00:00
Dániel Buga
b2a8d6bcee
Move UART instance info to esp-metadata ( #3698 )
...
* Move UART instance info to esp-metadata
* Fix typo
2025-06-30 16:38:15 +00:00
Dániel Buga
b11d810d97
Tweak and make use of the old bind_X_interrupt functions ( #3689 )
...
* Rename bind_interrupt functions
* Generate enable/disable functions, remove redundant irq mapping from metadata
* Clean up PARL_IO
* Refactor SPI master, I2S, Uart
* Update USB_DEVICE
2025-06-30 15:28:42 +00:00
Dániel Buga
c72889a73d
Generate i2c instances from metadata ( #3678 )
2025-06-24 12:18:22 +00:00
Dániel Buga
1cd3a28954
Move IO_MUX signals to metadata ( #3663 )
...
* Generate Input/OutputSignal enums
* Deduplicate alternate function tables
* Don't misuse instance config for pins and signals
2025-06-23 14:43:17 +00:00
Dániel Buga
9507fa38b4
Move smaller GPIO properties to metadata ( #3657 )
...
* Move other GPIO properties
* Redo USB pins as pin capability
* Deduplicate interrupt status enum
* Remove unnecessary interrupt enable bits on S2
* Update S2 PAC and remove manual io_mux hackery
* Generate io_mux function from metadata
2025-06-23 12:45:21 +00:00
Dániel Buga
b98631570f
Move GPIO pin properties to metadata ( #3656 )
...
* Reorganize esp-metadata
* Move GPIO properties to metadata
* Fix AF enum variants, remove need for paste for them
2025-06-20 07:45:49 +00:00
Dániel Buga
2438d03b21
Simplify generated code to save on build time, yeet a few dependencies ( #3643 )
...
* Reduce use of iter::chain
* Cache all symbols
* Trim xtensa-lx-rt deps
* Remove unused dep
* Replace chrono with jiff
* Yeet minijinja
* Save a bit on toml_edit
* Disable some default features
* Disable regex log filters
* Reduce xtensa-lx-rt build script
* Remove unnecessary dependencies
* Remove darling
* Update embedded-test
* lol
* Clean up
* Only validate loaded config once
* fmt
* Changelog
2025-06-17 20:35:00 +00:00
Dániel Buga
891a5a4a8c
Move some more peripherals to metadata ( #3633 )
...
* Remove gpio bank 1 symbol
* Remove intr status width symbols
* Allow virtual periphs, redo ADC/DAC
2025-06-17 08:10:12 +00:00
Dániel Buga
3e6b85bf30
Update i2c/spi instance info ( #3627 )
...
* Add instances to drivers
* Move AnyI2c
* Move AnySpi and DataMode
* Generate new semver baseline
2025-06-13 13:56:52 +00:00
Dániel Buga
793b01beaa
Move timer instance config into driver metadata ( #3626 )
...
* Remove timg_timer1 symbol
* Ensure instances exist
* Rename timers to timergroup
* Remove unnecessary cfg
2025-06-12 14:49:04 +00:00
Dániel Buga
db3eb3da95
Remove hand-defined radio symbols ( #3632 )
2025-06-12 13:04:36 +00:00
Dániel Buga
f22ddb4a87
More i2c metadata & some additional cleanup ( #3620 )
...
* Define more i2c metadata
* Remove I2C1 AHB base address
* Encode address in metadata
* Extract timeout value calculation
2025-06-11 09:47:42 +00:00
Dániel Buga
48a5927767
Generate peripheral support table ( #3617 )
2025-06-10 13:13:24 +00:00
Dániel Buga
f6d54a0471
Generate macros from metadata ( #3604 )
...
* Generate macros from metadata
* Don't generate metadata env vars
* Add trm link, change cores to integer
* Port RMT memory constants
* Add some I2C flags
* Auto-generate PeriConfig, remove trait
* Make sure memory_range is hidden
2025-06-10 10:06:32 +00:00
Björn Quentin
faf7115b0c
Define DRAM memory region in esp-metadata ( #3300 )
...
* Define DRAM memory region in esp-metadata
* CHANGELOG.md
* Dedicated macros for memory region start/end
* Use `from_str_radix` in esp-config
* Fix search+replace mistake
* Fix
* fix'n fmt
* fix unused
* Minor change
2025-04-02 14:56:34 +00:00
Dániel Buga
17255ac0ab
Enable async ADC for C2 and H2 ( #3082 )
...
* Enable async ADC for H2
* Enable for C2
* Prevent disabling interrupt if an async ADC is in use
* Introduce adc1/2 symbols
2025-02-03 09:41:04 +00:00
Jesse Braham
1f129744fd
Create the esp-metadata package, update esp-hal build script to use it ( #1256 )
2024-03-13 12:27:24 +00:00
