esp-hal/CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

Please note that only changes to the esp-hal-common package are tracked in this CHANGELOG.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

Unreleased

Added

• Add initial LP-IO support for ESP32-C6 (#639)
• Implement sleep with some wakeup methods for esp32 (#574)
• Add a new RMT driver (#653, #667, #695)
• Implemented calibrated ADC API for ESP32-S3 (#641)
• Add MCPWM DeadTime configuration (#406)
• Add feature enabling directly hooking the interrupt vector table
• Implement sleep with some wakeup methods for esp32-s3 (#660, #689, #696)

Changed

• Update embedded-hal-* alpha packages to their latest versions (#640)
• Implement the Clone and Copy traits for the Rng driver (#650)

Fixed

• Fixed Async Uart read when set_at_cmd is not used (#652)
• USB device support is working again (#656)
• Add missing interrupt status read for esp32s3, which fixes USB-SERIAL-JTAG interrupts (#664)
• GPIO interrupt status bits are now properly cleared (#670)
• Increase frequency resolution in set_periodic (#686)

Removed

• Remove the allow-opt-level-z feature from esp32c3-hal (#654)
• Remove the old pulse_control driver (#694)

Breaking

• DmaTransfer::wait and I2sReadDmaTransfer::wait_receive now return Result (#665)
• gpio::Pin is now object-safe (#687)

0.10.0 - 2023-06-04

Added

• Add WithDmaSpi3 to prelude for ESP32S3 (#623)
• Add bare-bones PSRAM support for ESP32 (#506)
• Add initial support for the ESP32-H2 (#513, #526, #527, #528, #530, #538, #544, #548, #551, #556, #560, #566, #549, #564, #569, #576, #577, #589, #591, #597)
• Add bare-bones PSRAM support for ESP32-S3 (#517)
• Add async support to the I2C driver (#519)
• Implement Copy and Eq for EspTwaiError (#540)
• Add LEDC hardware fade support (#475)
• Added support for multicore async GPIO (#542)
• Add a fn to poll DMA transfers (#559)
• Add unified field-based efuse access (#567)
• Move esp-riscv-rt into esp-hal (#578)
• Add CRC functions from ESP ROM (#587)
• Add a debug feature to enable the PACs' impl-register-debug feature (#596)
• Add initial support for I2S in ESP32-H2 (#597)
• Add octal PSRAM support for ESP32-S3 (#610)
• Add MD5 functions from ESP ROM (#618)
• Add embassy async read support for uart (#620)
• Add bare-bones support to run code on ULP-RISCV / LP core (#631)
• Add ADC calibration implementation for a riscv chips (#555)
• Add async implementation for USB Serial/JTAG(#632)

Changed

• Simplify the Delay driver, derive Clone and Copy (#568)
• DMA types can no longer be constructed by the user (#625)
• Move core interrupt handling from Flash to RAM for RISC-V chips (ESP32-H2, ESP32-C2, ESP32-C3, ESP32-C6) (#541)
• Change LED pin to GPIO2 in ESP32 blinky example (#581)
• Update ESP32-H2 and ESP32-C6 clocks and remove i2c_clock for all chips but ESP32 (#592)
• Use both timers in TIMG0 for embassy time driver when able (#609)
• Re-work RadioExt implementations, add support for ESP32-H2 (#627)
• Improve examples documentation (#533)
• esp32h2-hal: added README (#585)
• Update esp-hal-procmacros package dependencies and features (#628)

Fixed

• Corrected the expected DMA descriptor counts (#622, #625)
• DMA is supported for SPI3 on ESP32-S3 (#507)
• change_bus_frequency is now available on SpiDma (#529)
• Fixed a bug where a GPIO interrupt could erroneously fire again causing the next await on that pin to instantly return Poll::Ok (#537)
• Set vecbase on core 1 (ESP32, ESP32-S3) (#536)
• ESP32-S3: Move PSRAM related function to RAM (#546)
• ADC driver will now apply attenuation values to the correct ADC's channels. (#554)
• Sometimes half-duplex non-DMA SPI reads were reading garbage in non-release mode (#552)
• ESP32-C3: Fix GPIO5 ADC channel id (#562)
• ESP32-H2: Fix direct-boot feature (#570)
• Fix Async GPIO not disabling interupts on chips with multiple banks (#572)
• ESP32-C6: Support FOSC CLK calibration for ECO1+ chip revisions (#593)
• Fixed CI by pinning the log crate to 0.4.18 (#600)
• ESP32-S3: Fix calculation of PSRAM start address (#601)
• Fixed wrong variable access (FOSC CLK calibration for ESP32-C6 #593)
• Fixed trap location in ram (#605)
• Fix rom::crc docs (#611)
• Fixed a possible overlap of .data and .rwtext (#616)
• Avoid SDA/SCL being low while configuring pins for I2C (#619)

Breaking

• Simplified user-facing SpiDma and I2s types (#626)
• Significantly simplified user-facing GPIO pin types. (#553)
• No longer re-export the soc module and the contents of the interrupt module at the package level (#607)

0.9.0 - 2023-05-02

Added

• Add bare-bones PSRAM support for ESP32-S2 (#493)
• Add DEBUG_ASSIST functionality (#484)
• Add RSA peripheral support (#467)
• Add PeripheralClockControl argument to timg, wdt, sha, usb-serial-jtag and uart constructors (#463)
• Added API to raise and reset software interrupts (#426)
• Implement embedded_hal_nb::serial::* traits for UsbSerialJtag (#498)

Fixed

• Fix get_wakeup_cause comparison error (#472)
• Use 192 as mclk_multiple for 24-bit I2S (#471)
• Fix CpuControl::start_app_core signature (#466)
• Move rwtext after other RAM data sections (#464)
• ESP32-C3: Disable usb_pad_enable when setting GPIO18/19 to input/output (#461)
• Fix 802.15.4 clock enabling (ESP32-C6) (#458)
• ESP32-S3: Disable usb_pad_enable when setting GPIO19/20 to input/output (#645)

Changed

• Update embedded-hal-async and embassy-* dependencies (#488)
• Update to embedded-hal@1.0.0-alpha.10 and embedded-hal-nb@1.0.0-alpha.2 (#487)
• Let users configure the LEDC output pin as open-drain (#474)
• Use bitflags to decode wakeup cause (#473)
• Minor linker script additions (#470)
• Minor documentation improvements (#460)

Removed

• Remove unnecessary generic from UsbSerialJtag driver (#492)
• Remove #[doc(inline)] from esp-hal-common re-exports (#490)

0.8.0 - 2023-03-27

0.7.1 - 2023-02-22

0.7.0 - 2023-02-21

0.5.0 - 2023-01-26

0.4.0 - 2022-12-12

0.3.0 - 2022-11-17

0.2.0 - 2022-09-13

0.1.0 - 2022-08-05